Flashback Arrestors
We have arange of flashback arrestors designed for use with either Air Products’ Integra® cylinders or with regulators used on conventional cylinders. All units comply with EN ISO 5175-1and feature:
- Dust filter -promotes long life
- Gas non-return valve (check valve) -prevents dangerous gas mixtures (NV)
- Flame arrestor -prevents flashback (FA)
- Thermal cut-off valve -prevents excessive temperatures (TV)
- Pressure-sensitive cut-off valve -interrupts the further gas flow on pressure shocks (PV) (only with re-settable flashback arrestors)
It is recommended that Flashback arrestors are tested for leaks and gas return flow safety at least once per year.
Integra® Flow Optimisers
For use with our leading Integra® cylinders.
- No need for extra regulators or flow meters
- Simply change the connector and with one click you have the correct gas flow rate
- Available in a range of flows: 8, 10, 12, 15 and 18 litres per minute
- Reduces gas consumption –saves you money
Regulators
We have a complete range of regulators suitable for all cylinders and cylinder packs up to 230 bar with a BS341 No3 (5/8” right hand thread) outlet connection.
- Single-stage Argon/ Argon mix regulators
- Single-stage and two-stage regulators suited for all inert (Argon, Helium and Nitrogen) gases/mixtures
- Single-stage and two-stage regulator suited for Oxygen
Regulators for fuel gases
For fuel gases we have a range of regulators suitable for suitable for cylinders and packs with a BS341 No4 (5/8'' left hand thread) outlet connection
- Acetylene single-stage regulator: two gauges, an outlet delivering 0-1.5 bar and a maximum flow of 30 m3
- Propane and Apachi® Propylene single-stage regulator : outlet delivers 0-4 bar and a maximum flow of 16.5 m3
Nitrogen Regulators
Additional Items
We also carry a selection of:
- hoses
- heaters
- adaptors
- trolleys
- sundry equipment for liquid supply
See the Range
Choose our innovative Integra® cylinder – smaller, safer, and easier to use.
The cylinder is filled with 30 litres at 300 bar pressure meaning that it often outlasts conventional 47 litre, 200 bar equivalents.
The quick-connecting Integra® gas flow optimisers are pre-set to specific gas flow rates to control flows and allow for rapid cylinder changeovers.
If you prefer more volume in your cylinder, then choose our gas in a larger 47 litre, 300 bar cylinders to maximise welding time and minimise cylinder handling.
Seeing is believing: book a demo
Air Products' Gastrak® Service
Save money, increase productivity and improve quality. Whether you use single cylinders or have gases piped, the Gastrak® service can help.
- Reduce costs: By eliminating pre-weld surge and excessive gas flow rates you will use less gas.
- Improve quality: Consistent use of the optimum gas flow rate improves weld quality and reduces rejects.
- Easy installation: Gastrak® equipment can be integrated into an existing or new gas pipeline, or can be used with traditional or Integra® cylinders.