Animated loader dots14ComingSoonAnimated loader dots

Innovative Integra® welding gas cylinder

– small but mighty solution

The innovative cylinder was developed for the growing production and safety demands in the welding industry with features that save you time and money.

Our high pressure Integra® cylinders (300 bar)  are 23% lighter and 33% smaller meaning they deliver a large volume of gas safety and cost effectively. Available in 30 litres and 10 litres, the compact cylinder range is engineered with invaluable features, such as the built-in regulator, to optimise your welding operation.



What are the Benefits of Air Products' Integra® Cylinder?​

Safer At Work 

Shorter and more stable than traditional cylinder so lower risk of the cylinder falling

Reduced Risk of Regulator Damage 

Regulator is fully contained within protective guard

Reduced Exposure to Pressure Hazard

A built-in regulator 

Easier to Use 

Smaller, lighter and more maneuverable than traditional cylinders

Easy Connection

Snap-on connection to cylinder—no need for spanners

No Need for Bottle Keys

Hand-operated on/off valve

Saves Time and Money

High pressure (300 bar) filling technology delivers a large volume of gas in each cylinder

Reduced Gas Consumption 

Gas economiser reduces gas consumption (shielding gas version)

Integra® Cylinder Range

MIG/TIG stainless steel, aluminium; TIG carbon steel Argon 169034 10 litre 3.03 m3 17.01 kg Ar
MIG/TIG stainless steel, aluminium; TIG carbon steel Argon 14292 30 litre 9.08 m3 64.38 kg Ar
MAG all carbon steel Ferromaxx® Plus 160263 30 litre 8.73m3 61.54 kg ArHeC20/12
MAG carbon steel >10mm thick Ferromaxx® 15 403546 30 litre 9.59 m3 65.64 kg ArCO15/2.5
MAG carbon steel <10mm thick Ferromaxx® 7 14413 30 litre 9.21 m3 65.64 kg ArCO7/2.5
MAG all stainless steel Inomaxx® Plus 160261 30 litre 8.09 m3 64.49 kg M12ArHeC35/2
MAG thin stainless steel Inomaxx® 2 160258 30 litre 9.00 m3 64.49 kg M12ArC2
TIG stainless steel Inomaxx® TIG 500775 30 litre 8.87 m3 65.49 kg R1ArH2
MIG/TIG aluminium & alloys Alumaxx® Plus 160259 30 litre 8.14 m3 59.29 kg 13ArHe30
Fuel cutting Oxygen 123532 30 litre 9.15 m3 61.64 kg O2
Fuel cutting Acetylene 123805 30 litre 6 kg 60.00 kg C2H2


How can I set and maintain the optimum flow for my welding process?

Our Integra® cylinder features integrated flow optimisers - this great precision engineered device ensures the optimum pre-set flow for your welding process.


"Is the cylinder supplied with an IFO (Integra® Flow Optimiser)?"

No. There are 6 different IFOs with flow rates ranging from 8-20 l/min. You need to order the required IFO/s for your process when you order a cylinder for the first time.


"How do cylinders last so long is there is less gas?"

On average there is 10% less m3 gas in the Integra® cylinder compared to conventional 200 bar cylinders. However as the IFO ensures a constant gas flow rate, excessive gas consumption and waste is eliminated meaning the cylinders often last as long.


"How do I know how much gas is left in the cylinder?"

The Integra® cylinder has a contents gauge which always shows how much gas is left even when the cylinder is not in use.