Nebuliser equipment - cleaning & maintenance

After each treatment

Wash face, rinse mouth and wash hands.
Disconnect the nebuliser chamber, remove the baffle and wash both of them in warm soapy water and then rinse thoroughly with clean water.
After washing the chamber and baffle, reassemble and reconnect it to the tubing and blow air from the compressor unit through it for a few seconds. This will dry the chamber and the tubing. The jet holes should be blown clear.
On a regular basis, unplug the compressor and wipe it clean with a damp cloth.
Store the machine in a dust and smoke free area.
Check the tubing regularly for kinking or holes as these may affect the performance of your nebuliser.

Caution:
Do not immerse the nebuliser compressor in water. Do not attempt to remove the outer case of this unit, you may get an electric shock.

Every three months you should replace the chamber, tubing and mouthpiece/face mask.

Filters – the device type and environment will determine how often you will need to change your inlet filter. Please contact our customer service team on +353 (0)1 809 1800, LoCall 1850 240202 (ROI only) or Freephone 0800 328 5875 (Northern Ireland only) for full details.

Note:
If you run out of consumables or filters please call our customer service team on LoCall 1850 240202 (ROI only) or 0800 328 5875 (Northern Ireland only) and we may arrange to send you more.